Products · Open Source
Simulated instruments. Test software. Kiosk systems.
All open source on GitHub. Free, so you can read my code before you write to me.
-
scpi-sim
Simulated lab instruments (multimeter, power supply, relay multiplexer) that behave like real LAN instruments over raw socket, VXI-11 and HiSLIP. Profiles for ten models from Rohde & Schwarz, Keysight, Keithley and Siglent, fault injection and a pytest plugin.
-
modbus-sim
Simulated Modbus devices that behave: an energy meter whose counters count, a temperature controller that heats towards its setpoint, a frequency converter that ramps and trips. For SCADA links, gateways and data loggers without the hardware.
-
hart-sim
Simulated HART field devices, a pressure and a temperature transmitter, over HART-IP. They keep state, turn the process value into a loop current with NAMUR NE 43 alarm levels and can be made to fail while they run.
-
opcua-sim
Simulated OPC UA devices that behave and fail: a drive that ramps after Start and latches a trip until Reset, a transmitter whose broken sensor reads BadSensorFailure at 3.6 mA, alarms that arrive as real OPC UA events and wait for your acknowledgement. For SCADA links, HMIs and gateways without the plant.
-
enip-sim
Simulated EtherNet/IP (CIP) devices that behave: an AC drive whose motor ramps when you set the run bit in its output assembly and trips on command, an I/O block that mirrors its channels. Explicit messaging, unconnected and connected (Forward_Open), cross-checked against pycomm3 — for scanner, SCADA and gateway code without a PLC.
-
scpi-replay
Records what a test program and an instrument say to each other and keeps it as a file. Replays it later as a stand-in instrument, or checks a real instrument or a simulator against it with tolerance rules.
-
bench-automation
End-of-line test station for a 12 V embedded PC: power-up and inrush check, supply rails through a relay multiplexer, boot watch on the serial console, on-device checks and a report per unit. Runs completely against simulated instruments.
-
interface-test-kit
Interface test that runs on the embedded PC itself: serial ports with handshake lines, USB, Ethernet and CAN. Guides the operator step by step with Y/N questions, for the end-of-line test and for RMA repairs.
-
boot-log-diff
Compares the boot log of a board with a known-good one and shows only what really differs. Recognises common faults such as a missing PHY or an eMMC timeout and explains them in plain words; JUnit and HTML output for CI.
-
test-protocol
Turns raw test results into a printable protocol per device: measured values against limits, a clear verdict with the failures on top, checksums of the input files and signature boxes. Merges several result files of one unit.
-
kiosk-kit
Turns a Debian machine with GNOME into an unattended touch kiosk: display off when idle and a waking touch that is swallowed, a browser that survives updates, touch calibration under Wayland.
More on GitHub, for example a Firefox for Android add-on for self-hosted Vaultwarden: github.com/steitec ↗