This board is equipped with the Philips LPC2368. Due to the large number of extras on this board, the application possibilities are almost limitless.
ARM7 LPC2368 LAN/USB/SD
ARM7 LPC2368 LAN/USB/SD
Dieses Board ist mit dem MCS51 Mikrocontroller AT89C51ED2 von Atmel bestückt. Der Controller verfügt über 64 kB Flash, 1792 Byte RAM und 2 kB EEPROM.
30,56 EUR
AT89C51ED2 Base Board
AT89C51ED2 Base Board
Das ATMEGA1280 Board der AVR Familie von ATMEL bietet Ihnen die gewohnt einfache Programmierung und außerdem eine große Anzahl Portpins.
31,99 EUR
BASE AVR ATMEGA1280
BASE AVR ATMEGA1280
The ATMEGA2560 board of the Atmel AVR family offers you the same simple programming and also a large number of port pins.
34,49 EUR
BASE AVR ATMEGA2560
BASE AVR ATMEGA2560
The small TINY2313 Board is well equipped for an entry into the world of AVR microcontroller, but also for professional users, primarily for smaller projects. For often, it turns out that the controller of the ATMEGA series are completely oversized.
BASE AVR TINY2313
BASE AVR TINY2313
This board of the AVR family is equipped with the ATMEGA 64 in TQFP64 design. It has been specially designed for a space-saving solution for many applications.
BASE AVR ATMEGA64
BASE AVR ATMEGA64
The XMEGA Board of the Atmel AVR family is different from the previous generation of the microcontroller by increased data processing speed and less power consumption.
34,49 EUR
BASE AVR XMEGA128A1
BASE AVR XMEGA128A1
This board of the AVR family is equipped with the ATMEGA 128 in TQFP64 design. It has been specially designed for a space-saving solution for many applications.
BASE AVR ATMEGA128
BASE AVR ATMEGA128
This board is equipped with the ARM7 LPC2214 in 144-pin LQFP design. Due to the large number of I / O pins, the Board is perfect for very complex applications.
ARM7 LPC2214 Board
ARM7 LPC2214 Board
This board is equipped with the ARM Cortex M3 in 64-pin LQFP design. Controllers with this structure are regarded as successors of the ARM7 architecture.
ARM STM32F103 Cortex M3 Board
ARM STM32F103 Cortex M3 Board
Das BASE PIC16F628 V1 Board ist mit dem 16-bit PIC Mikrocontroller PIC16F628A in DIP 18 Pin Bauform von Microchip bestückt.
23,38 EUR
BASE PIC16F628 V1
BASE PIC16F628 V1
8-Kanal Eingabe durch DIP Schalter für Ihr Mikrocontroller Board.
5,64 EUR
Interface Test 10P / DIP8
Interface Test 10P / DIP8
The STM8S Stamp board, equipped with a Harvard architecture based 8-bit microcontroller, is ideal for small projects or breadboard circuits. 68 bit GPIO (I/O)
STM8S Stamp
STM8S Stamp
Diese Kabel haben beidseitig Steckverbinder, sodass eine lötfreie Verbindung zwischen dem Mikrocontrollerboard und einem Zusatzmodul hergestellt werden kann. Länge 22 cm.
3,34 EUR
Kabel FF WR 22
Kabel FF WR 22
Diese Kabel haben einseitig Steckverbinder, sodass eine lötfreie Verbindung zwischen dem Mikrocontrollerboard und einem Breadboard hergestellt werden kann. Länge 12 cm.
2,19 EUR
Kabel FM WR 12
Kabel FM WR 12
8-Kanal Eingabe mit regelbaren Widerständen für Ihr Mikrocontroller Board.
9,09 EUR
Interface Test 10P / ADC
Interface Test 10P / ADC
Sesitive Toch Pad 4x4 mit 16 kapazitiven Tastern. Frei von jeder Mechanik ist das Sensitive Touch Pad 4x4 ein sehr zuverlässiges und einfach anzuschließendes Keypad.
18,29 EUR
Sensitive Touch Pad 4x4
Sensitive Touch Pad 4x4
