Manufacturer

LCD 16116H

17,14 EUR

excl. Shipping costs

Shipping time: 2-3 weeks

Product no.: 602ACC01

Dieses LCD Modul kann einfach an die Boards mit dem 14-poligen LCD Connector angeschlossen werden. Lötarbeiten sind hierzu nicht erforderlich.

Technische Daten:

Display	Anzahl Zeichen	16
	Anzahl Zeilen	1
	Display Zeichensatz	5 x 8 Pixel
	Farbtiefe	monochrom schwarz
	Hintergrundbeleuchtung	nein
	Display Controller	HD44780 kompatibel
	Spannungsversorgung	5 Volt DC
	Boardgröße	8,0 x 3,6 cm

Schnittstellen zur Ansteuerung	Parallel	14 Pin Connector

Lieferumfang	LCD 16116H Display Modul
	Anschlusskabel 14-polig
	Datenblatt mit Programmbeispielen

This product is compatible with:

This board is equipped with the Philips LPC2368. Due to the large number of extras on this board, the application possibilities are almost limitless.

56,35 EUR

ARM7 LPC2368 LAN/USB/SD

This board is equipped with the ARM Cortex M3 in 64-pin LQFP design. Controllers with this structure are regarded as successors of the ARM7 architecture.

34,39 EUR

ARM STM32F103 Cortex M3 Board

This board is equipped with the ARM7 LPC2214 in 144-pin LQFP design. Due to the large number of I / O pins, the Board is perfect for very complex applications.

51,75 EUR

ARM7 LPC2214 Board

This board of the AVR family is equipped with the ATMEGA 128 in TQFP64 design. It has been specially designed for a space-saving solution for many applications.

34,49 EUR

BASE AVR ATMEGA128

This board of the AVR family is equipped with the ATMEGA 64 in TQFP64 design. It has been specially designed for a space-saving solution for many applications.

31,04 EUR

BASE AVR ATMEGA64

The small TINY2313 Board is well equipped for an entry into the world of AVR microcontroller, but also for professional users, primarily for smaller projects. For often, it turns out that the controller of the ATMEGA series are completely oversized.

22,99 EUR

BASE AVR TINY2313

Dieses Board ist mit dem MCS51 Mikrocontroller AT89C51ED2 von Atmel bestückt. Der Controller verfügt über 64 kB Flash, 1792 Byte RAM und 2 kB EEPROM.

30,56 EUR

AT89C51ED2 Base Board

Das BASE PIC16F628 V1 Board ist mit dem 16-bit PIC Mikrocontroller PIC16F628A in DIP 18 Pin Bauform von Microchip bestückt.

23,38 EUR

BASE PIC16F628 V1

Customers who bought this product also bought the following products:

The AVR Start Kit V1 is the perfect base for the ATMEGA128 AVR Stamp module. Equipped with voltage regulator, MAX232, JTAG and breadboard for own circuit designs.

32,79 EUR

AVR Start Kit V2

This board of the AVR family is equipped with the ATMEGA 128 in TQFP64 design. It has been specially designed for a space-saving solution for many applications.

34,49 EUR

BASE AVR ATMEGA128

This board is equipped with the Philips LPC2368. Due to the large number of extras on this board, the application possibilities are almost limitless.

56,35 EUR

ARM7 LPC2368 LAN/USB/SD

The ATMEGA2560 board of the Atmel AVR family offers you the same simple programming and also a large number of port pins.

34,49 EUR

BASE AVR ATMEGA2560

AVR JTAG USB V1 is a module which was designed to programm and debug AVR microcontroller. The microcontroller communicates via the 10 pin AVR JTAG connector with this module. Condition is AVR Studio 4.XX and the USB port of your PC.

35,37 EUR

AVR JTAG Programmer & Debugger (USB)

8-Kanal Eingabe mit regelbaren Widerständen für Ihr Mikrocontroller Board.

9,09 EUR

Interface Test 10P / ADC