Manufacturer

AVR Stamp ATMEGA128

22,99 EUR

excl. Shipping costs

Shipping time: 2-3 weeks

Product no.: 300AVR04

Downloads
AVR Stamp ATMEGA128 Schematic	24.93 KB

This small module is equipped with the AVR ATMEGA 128 in 64-pin TQFP design. It is ideally suited to integrate it into their own circuits (spacing of 2.54 mm). Moreover, it can be plugged on the separately sold AVR START KIT V1.

Technical Specification
- ATMEGA 128-16 Controller in 64-TQFP design
- 128 kB Flash memory
- 4 kB RAM
- 4 kB EEPROM
- 16 MHz crystal on board
- 53 I/O Pins
- 10 bit AD-converter, USART, SPI, I2C, Timer/Counter 8/16 bit, 8 bit PWM, Watchdog, RTC
- 10 Pin AVR ISP Connector
- 10 Pin Connector Port C
- Power supply voltage 5 Volt DC

Scope of Delivery
- AVR Stamp ATMEGA128 Module
- CD ROM with manual, schematics and datasheets

Recommended products:

The AVR Start Kit V1 is the perfect base for the ATMEGA128 AVR Stamp module. Equipped with voltage regulator, MAX232, JTAG and plenty of space for the Mini modules or own circuit designs.

22,89 EUR

AVR Start Kit V1

The AVR Start Kit V1 is the perfect base for the ATMEGA128 AVR Stamp module. Equipped with voltage regulator, MAX232, JTAG and breadboard for own circuit designs.

32,79 EUR

AVR Start Kit V2

AVR JTAG USB V1 is a module which was designed to programm and debug AVR microcontroller. The microcontroller communicates via the 10 pin AVR JTAG connector with this module. Condition is AVR Studio 4.XX and the USB port of your PC.

35,37 EUR

AVR JTAG Programmer & Debugger (USB)

This AVR programmer has a serial interface. Thus, newer computers or laptops that are not equipped with a parallel interface can be easily used.

22,89 EUR

AVR ISP Programmer (RS232)

This AVR programmer has a USB interface. Thus, newer computers or laptops that are not equipped with a parallel port can be easily used.

32,50 EUR

AVR ISP Programmer (USB)

Identical to the AVR ISP mkII from Atmel. This ISP programmer is connected to the USB port of your PC. Microcontroller can programmed with ISP, PDI, and TPI. 100% compatible with AVR Studio from Atmel.

31,83 EUR

AVR ISP Programmer mkII (USB)

This product is compatible with:

The AVR Start Kit V1 is the perfect base for the ATMEGA128 AVR Stamp module. Equipped with voltage regulator, MAX232, JTAG and plenty of space for the Mini modules or own circuit designs.

22,89 EUR

AVR Start Kit V1

The AVR Start Kit V1 is the perfect base for the ATMEGA128 AVR Stamp module. Equipped with voltage regulator, MAX232, JTAG and breadboard for own circuit designs.

32,79 EUR

AVR Start Kit V2

Customers who bought this product also bought the following products:

Das MTC-16205D LCD Modul ist hervorragend für die Arduino Boards geeignet.

7,57 EUR

MTC-16205D LED Backlight - Arduino

PCB Converter Board for ICs in SOIC 14 / LGA 14 design to DIP 14 Pin.

1,15 EUR

PCB SOIC14 / LGA14

This interface board can easily connected to the boards with the 10 pin connector.

4,49 EUR

Interface Test 10P / OUT

8-Kanal Eingabe durch Taster für Ihr Mikrocontroller Board.

4,49 EUR

Interface Test 10P / INP

Dieses Modul ist geeignet, um eine zusätzliche RS422 bzw. RS485 Schnittstelle zur Verfügung zu stellen.

5,64 EUR

Mini 422/485 Modul

Dieses Experimentierboard, bestückt mit dem 89C51RE2 Mikrocontroller von Atmel, zeichnet sich durch ein großzügiges Platzangebot aus, auf dem eigene Erweiterungen und Schaltungen problemlos untergebracht werden können.

38,75 EUR

89C51RE2 Experimentier Board