ARM LPC1768 Cortex M3 LCD Board

117.23 USD
( excl. Shipping)
 
ARM LPC1768 Cortex M3 LCD Board
Product No.: 400ARM10
Shipping time: ca. 2-3 Weeks ca. 2-3 Weeks
Print product data sheet
X
This is a development board of the Cortex M3 microcontroller family from NXP. Equipped with Ethernet LAN, USB 2.0, USB Host, SD Card, RS-232, TFT LCD display and joystick (5-way).

Technical Specification:

Microcontroller ARM LPC1768 Cortex M3 from NXP 512 kB Flash Memory
    64 kB RAM
    32-bit
    TQFP 100 design
    A/D-Converter 12-bit
    D/A-Converter 10-bit
 
Board Touch Screen TFT LCD 240x320 Dots, 3.2 Inch, 65536 Colors
  RTC Circuit 32,768 kHz crystal and backup battery (option)
  Joystick 5-way
  1x Push button for own applications
  8x LED for own applications
  1x Variable resistor (10kOhm) A/D-Converter check
  Bootloader available, programmable via RS232
  USB Host Type A
  Sound Buzzer
  Power supply 5 Volt DC / 850 mA
  PCB size 15,3 x 9 cm
 
Interfaces 1x RS232 (ISP) 4 Pin Connector
  1x RS232 4 Pin Connector
  1x ARM JTAG 20 Pin Connector
  1x USB 2.0 Full Speed Type B
  1x Ethernet LAN 10/100 MBit RJ45
  1x Slot for memory cards Micro SD
  1x GPIO 8 channel / UART 10 Pin Connector
  1x GPIO 1 channel / D/A-Converter 3 Pin Connector
  1x GPIO 1 channel 3 Pin Connector
  1x GPIO 2 channel / I2C Bus 4 Pin Connector
  1x GPIO 4 channel / CAN Bus 4 Pin Connector
  1x GPIO 3 channel / I2S TX 5 Pin Connector
  1x GPIO 3 channel / I2S RX 5 Pin Connector
 
Scope of delivery ARM LPC1768 Cortex M3 LCD Board
  serial programming cable
  Software CD


The CD contains: manual (English), data sheets, schematics, ARM7 tools, examples and source code (Please visit our download area)

File
File size
ARM LPC1768 Cortex M3 Schematic

Download
105.82 KB
ARM LPC1768 Board Manual

Download
1.8 MB
Customers who bought this product bought also the following products:
LPCXpresso LPC1343 + JTAG Debugger
[ Details ] LPCXpresso LPC1343 + JTAG Debugger
LPCXpresso is a compact low-cost development environment with integrated JTAG debugger from NXP. The board can be separated into two parts which run independently:
1. the target board with the LPC1343
2. the JTAG Debugger LPC Link
48.39 USD
( excl. Shipping)
1 x 'LPCXpresso LPC1343 + JTAG Debugger' order
Mini SD/MMC Modul
[ Details ] Mini SD/MMC Modul
10.68 USD
( excl. Shipping)
1 x 'Mini SD/MMC Modul' order
PCB LQFP48
[ Details ] PCB LQFP48
2.82 USD
( excl. Shipping)
1 x 'PCB LQFP48' order
Mini 232-TTL2
[ Details ] Mini 232-TTL2
Das Mini 232-TTL2 Modul ist mit dem MAX232 IC bestückt. Eignet sich zur Ansteuerung von 2x RS232 Schnittstellen mit TTL Pegel.
10.24 USD
( excl. Shipping)
1 x 'Mini 232-TTL2' order
Interface Test 10P / OUT
[ Details ] Interface Test 10P / OUT
This interface board can easily connected to the boards with the 10 pin connector.
5.79 USD
( excl. Shipping)
1 x 'Interface Test 10P / OUT' order
Steinert Technologies © 2010
Internetshop by Gambio.de © 2008
eCommerce Engine © 2006 xt:Commerce Shopsoftware