ARM7 LPC2368 LAN/USB/SD

This board is equipped with the Philips LPC2368. Due to the large number of extras on this board, the application possibilities are almost limitless. From data loggers and web servers to control devices via the Internet or your corporate network everything may be realized in this all-in-one solution.

Technical Specification
- LPC2368 Microcontroller ARM7 with internal 512 kB Flash Memory and 58 kByte RAM
- ISP (In System Programmer) interface on board
- JTAG ARM Connector (20 Pin) with Jumper for Debug/Real Time
- 14 Pin LCD Port with brightness adjustment
- USB 2.0 Port / Full Speed / Type B
- Ethernet LAN 10/100 Mb with RJ45 Connector
- SD/MMC-Card Slot
- 2x RS232 with 4 Pin plug
- 1x RS422/485 with 6 Pin plug / optional 75176 MAX3088
- RTC circuit with 32,768 kHz crystal and backup battery
- Push button for ISP Load
- Reset button
- 2x button - freely programmable by software
- 2x LED - freely programmable by software
- Buzzer
- Power supply 7 - 12 Volt DC
- PCB size 15,3 x 9 cm

Scope of delivery
- ARM7 LPC2368 Board
- Serial Programming Cable
- Examples and source code on CD
- Instructions (English), datasheets and schematics on CD
- ARM7 Tools (C-ARM V232a, GCC-ARM V331, RealView V300a, FlashMagic...)