Manufacturer

ARM STM32F Cortex M3 Board

56,35 EUR

excl. Shipping costs

Shipping time: 2-3 weeks

Product no.: 400ARM19

Downloads
ARM STM32F Board Manual	2.89 MB
ARM STM32F Board Schematic	94.29 KB

The ARM STM32F board, equipped with a Cortex M3 microcontroller, also offers Ethernet LAN, USB 2.0, USB Host, SD Card, RS232 and joystick (5-way).

Technical Specification:

Microcontroller	STM32F107VCT6 from ST	256 kB Flash Memory
		64 kB RAM
		32-bit
		LQFP 100 design
		A/D-Converter 12-bit
		D/A-Converter 12-bit

Board	RTC Circuit	32,768 kHz crystal and backup battery (option)
	Joystick	5-way
	1x Push button	for own applications
	1x Push button	Reset
	1x Push button	Tamper
	8x LED	for own applications
	1x Variable resistor (10kOhm)	A/D-Converter check
	Bootloader	available, programmable via RS232
	USB Host (option)	Type A
	Power supply	5 Volt DC
	PCB size	15,3 x 9 cm

Interfaces	1x RS232 (ISP)	4 Pin Connector
	1x RS232	4 Pin Connector
	1x ARM JTAG	20 Pin Connector
	1x USB 2.0 Full Speed	Type B
	1x Ethernet LAN 10/100 MBit	RJ45
	1x Slot for memory cards	Micro SD
	9x GPIO 8 channel	10 Pin Connector

Scope of delivery	ARM STM32F Cortex M3 Board
	serial programming cable
	Software CD

The CD contains: manual (English), data sheets, schematics, ARM7 tools, examples and source code (Please visit our download area)

Recommended products:

The TFT 240x320 Touch 3.2 is easy to control with most microcontrollers. The display has a size of 3.2" and 65,536 colors. It can be operated at 5 or 3 volts.

51,63 EUR

TFT 240x320 Touch 3.2

Customers who bought this product also bought the following products:

The TFT 240x320 Touch 3.2 is easy to control with most microcontrollers. The display has a size of 3.2" and 65,536 colors. It can be operated at 5 or 3 volts.

51,63 EUR

TFT 240x320 Touch 3.2

The OpenOCD ARM USB JTAG from NGX Technologies is a compact USB to JTAG in-circuit debugger and programmer designed for ARM cores. It connects via USB to the host PC.

33,95 EUR

OpenOCD ARM USB JTAG